|
¡ï Flap rollers/Big width Non-woven Flap Wheels:
Adopting high flexible design, using high cut effect and anti high temperature industrial Hand Pads and using superior glue. All the big width Non-woven Flap Wheels are mended on lathe and balanced by balancing machine. It is specially used on the uneven surface of workpiece and for high finishing required surfaces, like long line brushed finishes and removing of oxided surface of all kinds of metal plates, For different metal sheets, we can select different abrasives(Aluminium Oxide, Silicon Carbide) . Suit for big surface area sheets, like stainless steel, copper, aliminium and integrated circuits.
|
|
Usage¡¡Elevator, stainless steel sheets, kitchen utensil, copper and aluminium sheets, scagliola(marble), wooden floors, integrated circuits, etc.
Feature¡¡Special design for uneven surface of workpiece, no blockage under high speed polishing machine(3000/min), no dark points, good brightness, long line brushes finishes, excellent grinding effect, durable for use, workpiece's surface can keep for a standard. |
Specification
OD |
7.5CM---35CM£¨3 inch¡ª14inch£© |
Width |
20CM---150CM£¨8 inch---60inch£© |
Grit |
46#------3000#? SiC, Al2O3 |
Color |
Grey/Red/Green/White/Maroon/Brown/Dark Brown |
ID
&
Matrials |
Non-woven wheels:18MM/20MM/25MM, etc., Plastic Tube:50MM/76MM/100MM/150MM, etc. |
Phenolphthalein tube:32MM/40MM/50MM/76MM/90MM/100MM/150MM/200MM/350MM, etc. |
Aliminium tube:50MM/76MM/143MM, etc. Steel tubes of round, square hole etc., can also be equiped with flanges of different hole shapes and sizes, Customers can also supply tubes |
Density
Or Hardness |
Ajustable by changing the pcs of pads in each Flap wheel, and can also increase the Hardness by chemical treatment. |
Note: For big width of more than 40 CM, we suggest not to use Plastic tubes. |
|
|
|
